Fast-Acting OTC Solution

Foot File Callus Remover Kits | Professional-Grade Hard Skin Removal at Home

Imperial Feet Stainless Steel foot file is the most direct, most satisfying tool in foot care. Three complete callus care kits bundle the file with a Callus Softener Spray and Urea Foot Balm for complete and best foot care.

Shop athlete's foot treatment set

Shop by Concern | Foot File vs Full Callus Care Kit

Stainless Steel Foot File

Best for: Just the filing tool. You already have a softener and balm.

Callus Cure Kit

Best for: File + balm. A simple two-step routine.

File + Urea Foot Balm

Premium Callus Repair Kit

Best for: Complete 3-step routine. Softener, file, and balm.

Callus Softener + File + Urea Balm

Premium Callus Repair Kit XL

Best for: Complete 3-step routine with XL quantities.

Callus Softener (150ml) + File + Urea Balm (150ml)

Looking for the full callus removal routine with all individual products? Browse the Callus Removal collection for everything available.

Why Stainless Steel Foot File Better Than Pumice, Glass, or Electric?

Most people start with pumice. Most people eventually switch. Here is why stainless steel consistently outperforms other foot file materials.

Material	Durability	Hygiene	Precision	Wet or Dry Use	Autoclavable
Stainless Steel	Years	Non-porous, rinse clean	Excellent	Both	Yes
Pumice	Wears down	Porous, harbours bacteria	Limited	Wet only	No
Glass	Good	Good	Good	Dry preferred	No
Electric	Good	Variable	Less control	Dry only	No

Pumice absorbs bacteria from the skin into its porous surface.
You cannot fully clean it, and over time it becomes a bacterial colony rather than a hygiene tool.
Stainless steel has no pores.
Rinse under hot water after use and it is clean.
Autoclave it between clients in a professional setting and it meets clinical hygiene standards.

The dual-sided design: Coarse for thick calluses and hard skin, fine for smoothing and polishing. It means you get both the heavy lifting and the finishing in one tool.

Kit Comparison Guide | Which Callus Kit Is Right for You?

	Stainless Steel File	Callus Cure Kit	Premium Kit	Premium Kit XL
Stainless Steel File	✓	✓	✓	✓
Callus Softener Spray	✕	✕	✓ 75ml	✓ 150ml
Urea Foot Balm	✕	✓ 150ml	✓ 150ml	✓ 150ml
Best For	Already have softener + balm	Simple file + balm routine	Complete 3-step system	Maximum quantities, best value
Price	Lowest	Mid	Mid-High	Best value per ml

The Premium Callus Repair Kit XL is the most cost-effective for anyone committing to a consistent weekly callus care routine. The 150ml quantities of both the Callus Softener and Urea Balm last significantly longer than standard sizes.

Manual Foot File vs Electric Callus Remover For Feet | What's Better?

This is a common question and the answer depends on what you need.

Electric Callus Remover

Advantages:

Electric callus remover tools are convenient and require less physical effort.

Limitations:

They offer less precision than a manual file, cannot be autoclaved, and most are not suitable for wet use. Quality also varies significantly.

What to watch for:

Cheap electric removers can remove skin unevenly and may create rough patches if they are not used carefully.

Manual Stainless Steel Foot File

More control:

The Imperial Feet Stainless Steel File is harder to use incorrectly. Short, controlled strokes on the coarse side remove callus progressively, so you can feel the resistance and adjust accordingly.

Dual-sided finish:

The fine side polishes the skin to a smooth finish that most electric removers cannot match.

Best overall choice:

For most people, a stainless steel file used correctly after soaking or after applying Callus Softener Spray provides better control and significantly outlasts the average electric remover.

Get Salon-Smooth Pedicure Foot File Without Leaving Home

Professional pedicures deliver results partly because of skill — but mostly because of the right tools used in the right order: warm soak, chemical softener, professional-grade file, and rich urea balm.

The Premium Callus Repair Kit XL replicates that sequence at home in around 20 minutes, 1–2 times per week.

The callus remover for feet in the kit is the same dual-sided, autoclavable stainless steel tool used in professional settings, not a consumer approximation of it.

How to Use a Foot File | Technique, Frequency and Aftercare

Use the right preparation, filing technique, and aftercare to remove hard skin gradually without over-filing.

Dry Use (Fastest)

Apply the Callus Softener Spray to the callused area first.
Wait 30–60 seconds.
Then use the coarse side of the Stainless Steel File in short, controlled strokes across the callus.
Finish with the fine side to smooth.
Apply Urea Foot Balm immediately after.

Wet Use (Deepest)

Soak feet in warm water for 10–15 minutes or use the Cracks & Callus Foot Soak for added keratolytic softening.
File while the skin is still warm and soft.
Then rinse, dry, and apply balm.

Technique

Use short strokes in one direction.
Do not scrub back and forth aggressively.
Work the coarse side across the callus until you feel the resistance reducing.
Then switch to the fine side. The goal is smooth, not bare.

Frequency

Use the foot file 1–2 times per week for active callus reduction. Once calluses are controlled, reduce use to once weekly for maintenance.

Never File

Open wounds, bleeding skin, infected areas, or inflamed skin. If the skin is broken or sore, wait until it has fully healed before filing.

Need the complete routine?

For a full step-by-step routine, read our guide: How to Safely Remove Calluses at Home .

Before and After | What to Expect

With consistent filing and proper aftercare, calluses can be reduced progressively while keeping the skin smoother between sessions.

First Session

Callus visibly reduced after one filing session. Skin noticeably smoother immediately. Feet feel lighter.

After 1 Week

The hard skin layer is significantly thinner. Heel texture clearly improved with 2 sessions.

After 2–4 Weeks

Most established calluses significantly reduced or cleared with a consistent 1–2× weekly routine.

Ongoing Maintenance

Once per week filing + daily Urea Balm prevents calluses from rebuilding. Feet stay consistently smooth.

Who Should Take Extra Care With Foot Filing

Foot filing can be effective for managing hard skin and calluses, but some people need to take extra precautions or seek professional guidance.

Diabetics: Regular callus removal is especially important for diabetics. Thick calluses create pressure points that can lead to skin breakdown and infection. However, only file with very gentle pressure and never file on broken, infected, or ulcerated skin. Consult your podiatrist or GP before starting any callus removal routine if you have diabetes, neuropathy, or serious circulation issues.
Open wounds or cracked skin: Never file open heel fissures or cracked skin that has broken the surface. Use the Foot Fissure Cream or foot balm to heal fissures first, then resume filing once the surface has fully closed.
Neuropathy: Reduced sensation means you may not feel when you are filing too aggressively. Use only the fine side of the file and very light pressure if you have reduced sensation in the feet. Professional podiatry is the safer option for active neuropathy.
Children: Not recommended for children under 12 without healthcare provider guidance.

Important: If you have diabetes, neuropathy, reduced circulation, or loss of sensation in your feet, speak with a podiatrist or healthcare professional before starting a foot-filing routine.

Foire aux questions sur les limes pour les pieds

À quelle fréquence dois-je utiliser une râpe pour les pieds ?

1 à 2 fois par semaine pour réduire activement les cors. Une fois par semaine pour l’entretien une fois les cors maîtrisés. Une utilisation plus fréquente n’est pas plus efficace et peut amincir excessivement la peau. La peau a besoin d’un peu de temps entre les séances pour se régénérer. Appliquez toujours immédiatement après le limage un baume hydratant pour les pieds ou une crème à l’urée.

Dois-je utiliser une râpe pour les pieds sur peau humide ou sèche ?

Les deux méthodes fonctionnent. L’utilisation à sec après avoir vaporisé le Spray Adoucissant pour Cors et Callosités permet d’agir plus rapidement. L’adoucissant chimique évite ainsi de faire tremper les pieds. L’utilisation sur peau humide après un bain de pieds chaud ou avec le Bain de Pieds pour Cors et Callosités pénètre plus profondément et s’avère particulièrement efficace sur les callosités très épaisses ou anciennes. Pour un entretien hebdomadaire classique, l’utilisation à sec avec le spray adoucissant est plus pratique.

Une râpe pour les pieds est-elle sans danger pour les diabétiques ?

Oui, avec les précautions nécessaires. L’élimination régulière des cors est d’ailleurs particulièrement importante chez les personnes diabétiques, car les cors épais créent des points de pression susceptibles d’entraîner des lésions cutanées. N’exercez qu’une pression très légère, n’intervenez jamais sur une peau lésée et consultez votre podologue ou votre médecin traitant avant de commencer si vous souffrez de neuropathie ou de graves troubles circulatoires.

Comment nettoyer une lime pour les pieds en acier inoxydable ?

Rincez abondamment à l’eau chaude courante immédiatement après utilisation afin d’éliminer les résidus cutanés. Pour un nettoyage en profondeur, frottez avec une brosse à ongles et du savon, rincez, puis laissez sécher à l’air libre. Pour une utilisation professionnelle ou en salon entre deux clients, stérilisez à l’autoclave conformément aux protocoles habituels de stérilisation des instruments. N’utilisez pas de désinfectants chimiques susceptibles de provoquer une corrosion à long terme.

En quoi une lime pour les pieds en acier inoxydable diffère-t-elle d’une pierre ponce ?

La pierre ponce est poreuse. Elle absorbe les bactéries et les particules de peau à sa surface et ne peut être entièrement nettoyée. Avec le temps, une pierre ponce devient insalubre. L'acier inoxydable est non poreux, hygiénique et conserve son efficacité indéfiniment. Il est également plus précis. Vous pouvez ajuster la pression et l'angle pour un retrait contrôlé d'une manière que la pierre ponce ne peut reproduire.

Que devrais-je utiliser après avoir limé pour éviter que les callosités ne reviennent ?

Appliquez le baume pour les pieds à l’urée immédiatement après chaque séance de limage, lorsque la peau est encore légèrement chaude. La formule à 10 % d’urée hydrate et continue en douceur d’exfolier la peau épaissie entre les séances, préservant ainsi la douceur obtenue grâce à la lime et ralentissant la formation de nouvelles callosités.